Damp Proofing For Your Properties?Easy Home Improvement Ideas

One of the major problems faced by people living near to the oceans or in areas that are prone to some type of flooding is that of damp. This is where water finds its way into your building regularly causing damages caused to the walls, floor timber and other bits of your home. If this problem goes unbridled, the damp may get to your fixtures and this may lead to extraordinarily grave damages in your home. It is therefore very essential that once you detect any sign of damp you take the appropriate measures to ensure that you keep it out so that it does not cause damage. The simplest way of making sure this is by enlisting the services of a damp proofing pro.

One of the areas most affected by damp is generally the walls of a building and this is where a damp proofing operation will most likely begin. To be sure that your walls aren?t prone to damp, a sort of barrier is generally installed. The 2 most well-liked ways of damp proofing wall is either by installing a remedial Damp Evidence Course (DPC) or by injecting some chemicals that form a barrier and prevent the capillary action of the water up the wall.

Using the DPC is generally the most preferred method of damp proofing walls since it is obviously the most efficient methodology. It involves the insertion of a humid evidence membrane typically made of a copper sheet, bituminous felt or thick polythene into the present wall which acts by stopping the capillary action of water up the wall. Before the DPC is installed, it is critical that a pro work on where it should be installed so that it can be useful. For example, where wooden floors have been used the DPC should be installed at least 1.5cm below the floor level but above the outside ground level.
On the other hand, where solid flooring materials have been used and are damp proofed, you would need to install the damp evidence membrane into the walls. This can be quite a difficult process since all the electric wiring, plumbing, skirting boards and other fixtures have to be removed from either side of the wall before the damp proofing can be done. Once this is done, a tungsten carbide tipped chainsaw is used to cut into the wall where the DPC will be inserted to stop the rising of water.

Given the complicatedness of the method of damp proofing employing a damp evidence membrane, it is always advisable that you hire a pro to accomplish the job for you.

Share This

Source: http://easyhomeimprovementideas.com/do-it-yourself-home-imrpovement/damp-proofing-for-your-properties-2896

plenty of fish scalloped potatoes how to tie a tie die hard phil collins